Guides
Short, practical answers to the questions every maker runs into — with numbers you can use.
3D printing tolerances: how much gap for a press, slide or loose fit
How much clearance to leave between 3D-printed parts so they press, slide or turn — with real numbers for FDM printers and a quick way to measure your own printer.
2 min readFDM design rules: 12 rules for parts that print right the first time
Wall thickness, overhangs, bridges, holes, chamfers, text size and strength — the practical design rules for FDM 3D printing, explained simply.
2 min readGridfinity explained: the 42 mm storage system
What Gridfinity is, how the 42 mm grid and 7 mm height units work, baseplates, bins, magnets and stacking lips — and how to make your own bins.
2 min readHeat-set inserts: hole sizes and how to install them
How to design holes for brass heat-set inserts in 3D prints, typical hole sizes for M2–M5, and how to press them in straight with a soldering iron.
2 min readHow to design a print-in-place hinge
How print-in-place hinges work, which gap to use, how to orient them, and how to fix a hinge that comes off the printer stuck.
2 min readThreads in 3D prints: printed threads, inserts or self-tapping screws?
When to print a thread, when to use a heat-set insert and when to let the screw cut its own thread — with hole sizes, clearances and print settings.
2 min read